Difference between revisions of "F-14A/B"

From DCS World Wiki - Hoggitworld.com
(LANTIRN Targeting Pod)
(LANTIRN Targeting Pod)
Line 375: Line 375:
 
# '''LANTIRN Polarity:''' Displays white or hot background. AGC is for automatic gain control, MGC is for manual gain control.
 
# '''LANTIRN Polarity:''' Displays white or hot background. AGC is for automatic gain control, MGC is for manual gain control.
 
# '''LANTIRN Information:''' Gives general information on the pod. SR is for slant range, AZ/EL for azimuth/elevation of sight, and rest is UTC time.
 
# '''LANTIRN Information:''' Gives general information on the pod. SR is for slant range, AZ/EL for azimuth/elevation of sight, and rest is UTC time.
# '''LANTIRN Track Mode:''' Displays the current tracking mode. A/A is for air-to-air, A/G is for air-to-ground.
+
# '''LANTIRN Track Mode:''' Displays the current tracking mode. A/A is for air-to-air, A/G is for air-to-ground. Right side is for current selected weapon.
 +
# '''Track Data:''' Displays information of LAT/LON and altitude of where the sight is at.

Revision as of 04:37, 2 September 2019

Credits to Jak for having the F/A-18C page serve as a guide.

The Grumann F-14A/B Tomcat is a two-seat, twin-engine supersonic variable wing-sweep fighter aircraft. The F-14 was the first US fighter jet with twin tails and was the largest & heaviest US fighter to ever fly from an aircraft carrier. The reason that the F-14 was so incredibly large and heavy was that it carried the large AWG-9 radar and accompanying AIM-54 Phoenix (air-to-air) missiles: this very capable combination allowed the F-14 to make shots of up to 200 nautical miles at the bad guys. Also, being big means you can carry a lot of fuel!

Of course, the practical range of the AWG-9 is rather more limited, especially if you are shooting at more maneuverable fighter-sized targets, but even at these closer ranges, the AIM-54 Phoenix is still a capable missile that should not be underestimated. The F-14 is also capable of carrying an array of air-to-ground weapons, such as dumb bombs in both high and low drag forms, air-to-ground Zuni rockets and even laser-guided bombs, which can be self-designated using the LANTIRN targeting pod on the F-14.

Most people will recognize and adore the F-14 because of its stardom presence in that one weird volleyball movie from the '80s. Its on-screen presence in movies will make the F-14 to appear docile and easy to fly, but due to lack of a fly-by-wire the F-14 can be a real handful: it being a pilot's aircraft however makes it fun to fly and learn. The analogous nature of the F-14 (comparable to the F-5E II Tigershark) will give you a good knowledge of the airplane over time but requires a bit of a different mindset that the computerized flight of the F/A-18C and the F-15.

Weapons List


Implemented

Partially or fully implemented weapons of the F14/A/B Tomcat:

  • M61 Vulcan Six-Barreled Gatling Gun
  • AIM-7 Sparrow
  • AIM-9 Sidewinder
  • AIM-54 Phoenix
  • Mk-81, 82, 83, and 84
  • GBU-10, 12, 16, and 24
  • MK-20 Rockeye
  • Zuni Rockets
  • BDU-33 Practice Bombs
  • ADM-141 TALD
  • LUU-2 Parachute Flare
  • Smokewinder
  • LANTIRN Pod
  • FPU-1 Fuel Tank

Hands On Throttle And Stick (HOTAS)


Throttle

Throttle.png

The throttle of the F-14 Tomcat consists of 2 quadrants, both for the left and right engines. There is an afterburner detent along with a cutoff detent for maximum throttle and shutdown of the engine for each quadrant.

The throttle has the following controls:

  1. Speed Brake Switch: 2-position switch. "EXT" is a momentary and needed input position that extends the speed brake outward depending on the aircraft speed.
  2. Wing Sweep Switch: 4-way hat switch. "AUTO" sets the wing to sweep automatically determined by an onboard computer, "BOMB" sets the wing to sweep in an angled position between fully extended and retracted and dependent on speed for the air-to-ground bombing.
  3. PLM Button: multifunction button. When the steering command is in A2A mode, this acts as a pilot lock-on tool for the AWG-9 radar. But when used for landing and/or in the LDG steering command mode, this allows for disengagement of the ACLS.
  4. CAGE/SEAM Button: multifunction button. When the steering command is in A2A mode, this allows for CAGE/SEAM lock-on of the AIM-9 Sidewinder. But when used for landing and/or in the LDG steering command mode, this allows for disengagement of the APC.
  5. Exterior Light Switch: 2-position switch. Used to toggle the exterior lights of the aircraft.
  6. ICS PTT Switch: 2-position switch. Acts as a push-to-talk system for the ICS system inside of the aircraft used between the Pilot and RIO. (or JESTER AI)

Control Stick

Stick.png

The control stick is located in the center of the cockpit, mounted onto the floor. Left and right movements of the control stick direct hydraulic movement to the spoilers and horizontal stabilizers of the aircraft. Forward and backward movement result to respectively the same but to the horizontal stabilizers.

The control stick has the following controls:

  1. Bomb Release Button: single-purpose button. When pressed in A2G steering command mode, all pylons selected with bombs will release respective of the ripple settings, type, and interval.
  2. Trim Hat: 4-way hat switch. Upward movement moves the aircraft downward, and downward movement moves the aircraft upward. Both left and right movements follow to their directions according to their name.
  3. Weapon Select Hat: 4-way hat switch. Bottom selection is OFF, and a ridge requires a momentary push action to move in/out of to GUN. Following all to the top are SW, then SP/PH which requires a momentary push action to switch between.
  4. DLC & Maneuver Flap Command Wheel: scrollable dial. Moving it with the landing gears fully deployed acts as a variable control for spoiler extension. With the landing gears up, the dial also acts the same but for flaps and slats.
  5. DLC Engage/Disengage & CMS Dispense Button: multifunction button. When pressed with the landing gears fully deployed, this controls the engagement and disengagement of the DLC system. But with the landing gears fully retracted, this allows for pilot control of the CMS system.
  6. Autopilot Reference & NWS Button: multifunction button. When the aircraft is up in the air, this controls specific autopilot settings. But when the aircraft is on the ground, this controls the activation of the nosewheel steering system.
  7. Autopilot Emergency Disengage Paddle: multifunction button. Disengages all autopilot modes and DLC and releases all autopilot switches and roll and pitch SAS switches to OFF position.
  8. Weapon Firing Trigger: two-stage trigger switch. The first detent enables CTVS and gun camera. Second detent releases selected forwards firing the weapon.

Flight Controls & Landing Gear


Flight Controls

Wheels-flaps.png

The F-14B has a large hydraulic system which covers for all of the control surfaces of the aircraft. Without the hydraulic system, or taking damage the controls are in risk of improperly working. The F-14 Tomcat was the last of its generation to have no integration of an FBW or FCS system, which was introduced with the F-15 Eagle.

The F-14's primary flight controls are:

  • Left Spoilers (LES): A set of spoilers that lie within the left wing of the aircraft that help with aileron movement and control that react opposite of the intended direction.
  • Right Spoilers (RES): A set of spoilers that lie within the right wing of the aircraft that help with aileron movement and control that react opposite of the intended direction.
  • Tailerons (TAIL): Two horizontal stabilizers located on the rear end of the aircraft that control both pitch and aileron movement.
  • Leading Edge Flaps (LEF): Normal slats located on the leading (front) edge of the wings to add lift.
  • Trailing Edge Flaps (TEF): Normal flaps located on the trailing (back) edge of the wings to add lift.


The control stick controls the stabilators, ailerons, and rudder and the rudder pedals control the rudder.

Flaps System

The aircraft's flap system provides more lift (and as a byproduct, drag). The flaps lever has two positions:

  • NONE: This applies no flap whatsoever to the wings of the aircraft.
  • FULL: This applies full movement of flaps to the wings of the aircraft.


The flaps lever allows for variable movement, which gives the pilot the ability to control the amount of flap they wish for.

Speed Brake

The speed brake is a flap located on the end of the aircraft designed to provide drag to decelerate faster. It is activated via the speed brake switch on the throttle. The two positions are:

  • EXT: When the switch is moved aft, this extends the speed brake of the aircraft out depending on the airspeed.
  • RET: When the switch is moved forward, this retracts the speed brake.

Trim

The tailerons are capable of being trimmed to make roll and pitch corrections. This is accomplished with the trim hat on the controls stick. When the autopilot system is engaged, the onboard computer will attempt to make active trim movements in order to keep the aircraft within the specified attitude when set, along of the setting parameters. As speed is either gained or lost, the trim will actively move the stick as well along of the tailerons to adapt.

Wing Sweep

The wings of the aircraft are a variable-sweep design allowing for automatic or manual movements from pilot input on the right throttle quadrant. Similar to wing fold, the wings are able to be overswept from its maximum position through a master reset of the system in order to allow tighter space and closer parking on the carrier deck.

Landing Gear

The F-14 Tomcat has 3 retractable landing gears: the nose gear, the left gear, and the right gear. The gear is moved via the gear lever on the left side of the cockpit. In the up position, the gear will retract. In the down position, the gear will extend. The gear lever cannot be put up with weight on wheels. The gear will not retract with the launch bar extended.

Nosewheel Steering

The nose gear features nosewheel steering (NWS) controlled by the rudder pedals. With the weight off of the wheels, it is disengaged. It automatically engages upon there being the weight on wheels. NWS is disengaged manually via the button on the stick.

Launch Bar

On the front nosegear is a launch bar that attaches the airplane to a catapult from launches from an aircraft carrier. Its deployment is pilot-controlled, but it is connected to the catapult by the ground crew (DCS default binding is U).

It is controlled via the launch bar switch on the left upper console. When the switch in the RETRACT position, the launch bar will retract, but physically cannot do so when connected to the catapult. The switch will move to the RETRACT position automatically when there is a weight off wheels. In the EXTEND position, the launch bar will extend if there is the weight on wheels.

Autopilot and Autothrottle


The F-14 Tomcat has the ability to automate certain types of flight via its Automatic Flight Control System (AFCS) and Automatic Throttle Control (ATC). The AFCS, or simply the autopilot, control the flight surfaces and the ATC controls the throttles.

AFCS

Afcs.png

The Automatic Flight Control System (AFCS), or just the "autopilot", controls the aircraft's flight controls to automate maneuvering. It is interfaced on the autopilot panel via the A/P engage switch. On the autopilot panel, there are 7 modes able to be toggled:

  1. Pitch Stabilizer Augmentation: 2-position switch. This switch controls the ability for the pitch to be augmented for dampening.
  2. Roll Stabilizer Augmentation: 2-position switch. This switch controls the ability for the roll to be augmented for dampening.
  3. Yaw Stabilizer Augmentation: 2-position switch. This switch controls the ability for the yaw to be augmented for dampening.
  4. VEC/PCD/ACL Switch: 3-position switch. This switch controls the remote control modes of autopilot with the steering bars and ACLS.
  5. 'ALT Switch: 2-position switch.' This switch controls the ability to maintain the current altitude when autopilot is engaged.
  6. HDG/GT Switch: 3-position switch. This switch controls the ability to maintain the current heading when autopilot is engaged.
  7. ENGAGE Switch: 2-position switch. This switch engages and disengages the autopilot.




ATC

The automatic throttle control (ATC), or just "autothrottle", controls the physical throttles and thereby automated thrust control. ATC is toggled via ATC engage/disengage switch next to the throttle. When the ATC is engaged, the physical means of the throttle quadrants will begin to move on their own. However, whenever the pilot makes any new movement to the throttle whatsoever, the ATC will disengage to allow pilot control over both of the engines. The ATC is primarily used for landing on a carrier along of the ACLS system.

Digital Systems Overview


Displays.png

The F-14 Tomcat comes with 2 digital display screens in the Pilot cockpit:

  • Vertical Display Indicator (VDI): a multifunction display that allows for the pilot to see their HUD in a form of a repeater, and the TCS.
  • Horizontal Situation Display Indicator (HSD): a multifunction display that allows for the pilot to see their virtual compass for navigation modes, and the AWG-9 Radar from the RIO TID as a repeater.

Master Modes

The F-14 Tomcat has 5 primarily modes for information displayed. The 5 master modes are:

  • TO: switch. Displays takeoff information on HUD and VDI for degrees.
  • CRUISE: single-purpose button. Displays in-air flight information on HUD and VDI for degrees.
  • A/A: single-purpose button. Displays air-to-air information on HUD and VDI for degrees; and weapon employment.
  • A/G: single-purpose button. Displays air-to-ground information on HUD and VDI for degrees; and weapon employment.
  • LDG: single-purpose button. Displays landing information on HUD and VDI for degrees.


Additionally, the F-14 Tomcat has an Air Combat Maneuver (ACM) panel which controls all air-to-air and air-to-ground aspects for armament.

Heads Up Display

The head-up display (HUD) is a projected display at the front of the cockpit that serves as the primary flight instrument. It also provides various indications for weapon delivery; this section will cover the HUD's indications in NAV master mode. Master mode/weapon specific indications on the HUD will be covered in the relevant section.

Reject Modes

Via the switches next to the TO button on the displays panel, you are able to "declutter" or remove information off of the HUD.

Navigation


The F-14 Tomcat has an inertial navigation system (INS) that allows the pilot to navigate by internal gyros aligned. However, due to the fault of having no GPS assistance, these gyros slowly drift over time and cause misalignment for visual information.

HSD

Hsd.png

The Horizontal Situation Display Indicator (HSD) is the primary interface with the airplane's navigation systems. The HSI can be accessed from the bottom display screen. The basic function of the HSI is a rotating compass with a looking-from-above perspective. The controls for this screen are:

  1. BRT Control: dial. Controls the brightness of the HSD screen.
  2. HDG Control: dial. Controls the heading reference in TACAN mode.
  3. CRS Control: dial. Controls the course heading reference in MAN and TACAN modes.
  4. Test Button: single-purpose button. Resets the HSD screen if overload protection activates.
  5. BIT Indicator: light. Shows a white light if a failure produces in the HSD.

Steering Commands

The HSD comes with a set of 5 different steering commands, which each have their own purpose towards displaying certain information:

  • TACAN: single-purpose button. Displays information based off of a radio beacon with range and direction.
  • DEST: single-purpose button. Displays information off of a selected waypoint from the RIO with range and direction.
  • AWL/PCD: single-purpose button. Displays information off of an ICLS frequency with azimuth and elevation bars (on VDI and HUD)
  • VEC: single-purpose button. ? (needs more info.)
  • MAN: single-purpose button. Displays information off of an entered heading (HDG Control) with direction.

Waypoints

The F-14B comes with an onboard flight computer system that handles waypoint navigation during in-air flight. The navigation system in the F-14B Tomcat gives a variety of waypoint holders, along with information for a set home plate.

Pilot

For the F-14B pilot, the waypoint information is able to be accessed by the DEST steering command and by using the NAV HSD display mode.

Radar Intercept Officer

For the F-14B Radar Intercept Officer, (RIO) the waypoints must be manually assigned by the RIO through the Computer Address Panel (CAP) system under the TAC DATA category. Once done, the waypoint must be selected through the CAP and entered in with coordinates similar to how INS alignment procedures are done.

TACAN

Tactical Air Navigation (TACAN) is a military radio navigation system. A TACAN beacon allows for an aircraft to determine its bearing and range from it, and using this information can navigate. TACAN's may be ground-based or be broadcasted by an airplane. TACAN channels have two bands, X and Y, and range from 1-126. 2 TACAN channels may be set present in the aircraft by both the Pilot and RIO for simultaneous use.

The TACAN setting knobs give a range of these options:

  • T/R: Transmit and receive. Gets bearing and range from the TACAN.
  • RCV: Receive. Gets bearing from the TACAN.
  • A/A: Air-to-air TACAN mode.
  • X: Tunes the selected frequency on the X band.
  • Y: Tunes the selected frequency on the Y band.

ICLS

For night and low visibility operations, aircraft carriers have an Instrument Carrier Landing System (ICLS) to allow for instrument approaches to the carrier. ICLS provides horizontal and vertical guidance. The F-14 is equipped with ICLS.

To activate the airplane's ICLS antenna, an ICLS dial is present to the right of the warning lights advisory panel, with an ARA on/off switch, used to toggle power to the system.

When ILS is selected on the HSI, two bars, one horizontal and one vertical, appear near the velocity vector on the HUD. These indicate a vertical and horizontal deviation from the optimal glideslope (3°) and course to the deck. When they are both aligned with the velocity vector (making a "+"), the aircraft is on course.

ACLS

For CAT III conditions and poor visibility, the F-14 is equipped with the Automatic Carrier Landing System (ACLS) to allow an automatic flight to the carrier via. a radio-guided input from a Landing Signal Officer. (LSO) The auto-throttle and autopilot systems must be engaged and present during the time of activation with this system, along with lights given to the left of the VDI display.

Datalink is required between the aircraft and the carrier in order for ACLS to work. When the best position of the azimuth and glideslope bars are within parameters, the nosewheel steering button is pressed in order to engage guidance.

Defensive Systems

The F-14B is equipped with various defensive systems: the AN/ALE-39 Countermeasure Dispensing System (CMDS), for the release of chaff and flares, the KY-28 Jammer, for jamming enemy radar, and the AN/ALR-67 Radar Warning Reciever (RWR), for detection of enemy radar emitters and missile launches.

AN/ALR-67 RWR

Alr-67.png

The AN/ALR-67 Radar Warning Receiver (RWR) provides the Hornet the ability to detect radars via the radio/microwave radiation they emit.

Audio Tones

Accompanying the RWR are various audio feedback tones:

  • Single Beep: A new ground- or sea-based emitter has been detected.
  • Double Beep: A new airborne emitter has been detected.
  • Repeating Beep: An emitter is tracking.
  • Faster Repeating Beep: An emitter is guiding a missile or is a missile.


On the RWR gauge, the RWR knob will control the volume of the RWR tones.

Emitter Identifiers

This list is, at present, not complete.

Type RWR ID
U Unknown
M Active radar-homing missile
S Search radar
3 SA-3 "Goa"
6 SA-6 "Gainful"
8 SA-8 "Gecko"
10 SA-10 "Grumble"
11 SA-11 "Gadfly"
11 F-111 Aardvark
12 SA-12 "Gladiator"
13 SA-13 "Gopher"
13 C-130 Hercules
14 F-14 Tomcat
15 F-15 Eagle
15 SA-15 "Gauntlet"
16 F-16 Fighting Falcon
17 C-17 Globemaster III
18 F/A-18 Hornet
22 Tu-22 "Blinder"
23 MiG-23 "Flogger"
24 Su-24 "Fencer"
25 MiG-25 "Foxbat"
29 MiG-29 "Fulcrum"
29 Su-27 "Flanker"
29 Su-33 "Flanker-D"
30 Su-30 "Flanker-C"
31 MiG-31 "Foxhound"
34 Su-34 "Fullback"
39 Su-25M "Frogfoot"
40 Spruance-class destroyer
48 Nimitz-class carrier
49 Oliver Hazard Perry-class frigate
50 A-50 "Mainstay"
52 B-52 Stratofortress
76 IL-76 "Candid"
78 IL-78 "Midas"

Television Camera Set


Tcs symbology.png

The F-14B is outfitted with the ALQ-100 Television Camera Set (TCS) pod, used for visually identifying aircraft during the time of which IFF was not a trusted/more inferior method to confirming hostile aircraft and to keep track of their position, as well as their living status.

Symbology

On the TID, in non-TV mode, a TCS track is indicated by a 1.5” strobe at TCS LOS azimuth with a hollow circle at the end.

The symbology on the video feed from the TCS has indicators for the FOV and two crosshairs indicating TCS LOS relative own aircraft, GACH, and AN/AWG-9 radar LOS relative TCS LOS, RACH. Additionally the track window is indicated by 4 small squares representing each corner of that window.

The gimbal angle crosshairs or GACH, which is a solid cross, indicate deflection of the TCS LOS from the aircraft datum line, ADL. GACH crosshair in center indicates TCS LOS along ADL and deflection towards the edges indicate deflection towards the gimbal limits with the video edges being maximum deflection.

RACH or radar angle crosshairs, a dashed crosshair, indicate radar antenna LOS when inside the current TCS FOV. When the sensors are slaved to one another RACH and GACH will coincide creating a single solid crosshair.

The track window indicates the area that the TCS contrast tracker is currently locked on to if it has acquired a target. When not in an active track these squares collapse into the center of the display being 2% of the screen width when in manual mode and 5% when in an auto mode.

LANTIRN Targeting Pod


Flir.png

The F-14B can carry the AN/AAQ-14 Low Altitude Navigation and Targeting Infrared For Night (LANTIRN) targeting pod. This pod consists of a Forward-Looking Infrared (FLIR) camera (which also includes a digital charged coupled device camera) for target locating and observing, a Laser Target Designator/Ranger for firing a laser that both designates targets for laser-homing weapons and gathers ranging information for designating whatever the FLIR is pointed at as an air-to-ground, and a Laser Spot Tracker (LST) which can search for and track a laser, allowing for the FLIR to be cued onto an offboard (ground or air-designated) laser from another unit and then designate a Target off said point; this allows for most effective buddy-lasing. The targeting pod can be used in both air-to-ground and air-to-air functions, but the LTD/R and LST are only used for A/G operation.

The following areas on the LANTIRN are to represent:

  1. A/C Position Data: Displays aircraft LAT/LON, altitude, and groundspeed information.
  2. LANTIRN Polarity: Displays white or hot background. AGC is for automatic gain control, MGC is for manual gain control.
  3. LANTIRN Information: Gives general information on the pod. SR is for slant range, AZ/EL for azimuth/elevation of sight, and rest is UTC time.
  4. LANTIRN Track Mode: Displays the current tracking mode. A/A is for air-to-air, A/G is for air-to-ground. Right side is for current selected weapon.
  5. Track Data: Displays information of LAT/LON and altitude of where the sight is at.