Jak/Sandbox

IDEAS

HAFU SYMBOLOGY RADAR upper hos amb frd unk

F/F lower hos amb frd unk

SURV full small hos amb frd unk

RADAR+F/F full small hos amb frd
RADAR+SURV

PPLI full n/a n/a frd n/a

Priority is first given to PPLI HAFU symbology. Any PPLI trackfile is displayed as a full circle regardless of whether there is onboard contribution.

Non-PPLI Radar trackfiles are prioritized after and have an upper HAFU shape. If a Radar trackfile also has F/F and/or SURV contribution, a lower HAFU is displayed as well. Trackfiles with Radar contribution are also characterized by a rank number in the center of the HAFU.

A trackfile with either only F/F contribution or F/F and SURV contribution is displayed as a lower HAFU shape. There is no indication as to whether SURV is a contributor.

Trackfiles with only SURV contribution have the lowest symbology priority. SURV-only trackfiles are displayed as 3/4 size HAFUs with full diamond, circle, or rectangle shapes.

AUTOMATIC FORMAT SELECTION Commonly-used formats can be automatically selected without using the [TAC] or [SUPT] menu to ease pilot workload.

When A/A or A/G master mode is selected, the A/A Radar/Attack format or A/G Radar format is displayed on the RDDI. When either master mode is selected the Stores format is displayed on the LDDI.

Independent of master mode, when the Sensor Control switch is pressed right and the format on the RDDI cannot accept TDC assignment, the A/A Radar/Attack format or A/G Radar format is displayed on the RDDI, depending on which was last selected. However, in A/A master mode, only the A/A Attack format can be displayed.

In A/A master mode, when the Sensor Control switch is pressed left and the format on the LDDI cannot accept TDC assignment, the Azimuth/Elevation (Az/El) format is displayed.

On the Az/El format, the A/A FLIR and A/A Stores format can be displayed by selecting the "STORES DSPLY" or "FLIR DSPLY" label at PB4 with the cursor. When IFF/RDR is the priority Az/El sensor, PB4 invokes the Stores format. When the FLIR is the priority Az/El sensor, it invokes the FLIR format. The priority sensor is cycled when the Sensor Control switch is bumped toward the Az/El with the cursor outside the tactical region. Note that the cursor is initialized over the STORES/FLIR DSPLY label, which is also outside the tactical region, allowing for immediate selection of the Stores or FLIR format and/or sensor cycling between IFF/RDR and FLIR.

Independent of master mode, when the Sensor Control switch is pressed aft and the format on the MPCD cannot accept TDC assignment, the HSI format is displayed on the MPCD. On any display, when the Sensor Control switch is bumped toward the HSI or SA formats after the TDC is already assigned to the format, the HSI and SA formats are cycled.