DCS editor conditions

General

Condition:	Time More	Added with: 1.2.0
Description:	Checks to see if the mission time is more than a specific value. Returns true once the mission time is more than the specified value.
Values:	Time (Number)

Condition:	Time Less	Added with: 1.2.0
Description:	Checks to see if the mission time is less than a specific value. Returns true once the mission time is less than the specified value.
Values:	Time (Number)

Condition:	Time Since Flag	Added with: 1.2.0
Description:	Checks the elapsed time since a flag was set true. Returns true once the specified time has elapsed since a flag was set true. Note: This counter gets reset each time the flag value changes.
Values:	Time (Number) Flag (Number)

Condition:	Random	Added with: 1.2.0
Description:	Has a random chance of returning true based on the given value.
Values:	Percentage (Number)

Condition:	Bomb in Zone	Added with: 1.2.0
Description:	Checks to see if a bomb has been dropped and is currently in a trigger zone. Returns true if the bomb is detected as flying in the zone. Note: Trigger zone must be sufficiently sized to detect the bomb at the 1 second interval triggers are checked.
Values:	Bomb Type Trigger Zone

Condition:	Signal Flare in Zone	Added with: 1.2.15
Description:	Checks to see if a given number of signal flares are in the zone. Returns true if the required number of signal flares of the correct color are in a trigger zone.
Values:	Flare Color Value (Number Required) Trigger Zone

Condition:	Mission Score Higher Than	Added with: 1.2.0
Description:	Compares a coalitions mission score as defined in the mission goals is higher than a given value. Returns true if the coalitions mission score is higher than a value.
Values:	Coalition Name Score (Number -100 to 100)

Condition:	Mission Score Lower Than	Added with: 1.2.0
Description:	Compares a coalitions mission score as defined in the mission goals is lower than a given value. Returns true if the coalitions mission score is lower than a value.
Values:	Coalition Name Score (Number -100 to 100)

Condition:	Player Score More	Added with: 1.2.0
Description:	Compares the players score value to a defined number. Player score is calculated by kills accumulated and the types of objects destroyed. Returns true if the player score is higher than a value.
Values:	Score (Number 0 - 10,000)

Condition:	Player Score Less	Added with: 1.2.0
Description:	Compares the players score value to a defined number. Player score is calculated by kills accumulated and the types of objects destroyed. Returns true if the player score is lower than a value.
Values:	Score (Number 0 - 10,000)

Condition:	Lua Predicate	Added with: 1.2.4
Description:	Runs the scripting engine code in the text box. Code must have the phrase "return true" in order for the condition to be returned true.
Values:	text (Lua Code)

Coalition

Condition:	Coalition has Airdrome	Added with: 1.2.0
Description:	Checks to see if the coalition controls an airbase. Returns true if that coalition does indeed control the airbase.
Values:	Coalition Name Airbase Name

Condition:	Coalition has Helipad	Added with: 1.2.0
Description:	Checks to see if the coalition controls an helipad. Returns true if that coalition has control of the static object helipad.
Values:	Coalition Name Airbase Name

Condition:	All of Coalition in Zone	Added with: 1.2.0
Description:	Checks to see if the entire coalition is inside a trigger zone. Returns true if every single unit is in the trigger zone.
Values:	Coalition Name Trigger Zone Name

Condition:	All of Coalition Out of Zone	Added with: 1.2.0
Description:	Checks to see if the entire coalition is outside of a trigger zone. Returns true if every single unit is outside of a trigger zone.
Values:	Coalition Name Trigger Zone Name

Condition:	Part of Coalition in Zone	Added with: 1.2.0
Description:	Checks to see if any unit of a coalition is inside a trigger zone. Returns true if any coalition unit is in the trigger zone.
Values:	Coalition Name Trigger Zone Name

Condition:	Part of Coalition Out of Zone	Added with: 1.2.0
Description:	Checks to see if any unit of a coalition is outside of a trigger zone. Returns true if any coalition unit is outside of the trigger zone.
Values:	Coalition Name Trigger Zone Name

Group

Condition:	Group Alive	Added with: 1.2.0
Description:	Checks to see if any unit in the specified group is alive in the mission. If any unit in the group is alive, the condition is true.
Values:	Group Name

Condition:	Group Alive Less Than	Added with: 1.2.0
Description:	Checks to see if a certain percentage of the group has been destroyed.
Values:	Group Name Percentage (Number)

Condition:	Group Dead	Added with: 1.2.0
Description:	Checks to see if the group is dead. If the entire group is dead, the condition returns true.
Values:	Group Name

Condition:	All Of Group In Zone	Added with: 1.2.0
Description:	Checks to see if the entire group is inside of a trigger zone. Returns true if all alive units in a group are in the zone.
Values:	Group Name Zone Name

Condition:	All Of Group Out of Zone	Added with: 1.2.0
Description:	Checks to see if the entire group is outside of a trigger zone. Returns true if all alive units in a group are outside of the zone.
Values:	Group Name Zone Name

Condition:	Part Of Group In Zone	Added with: 1.2.0
Description:	Checks to see if the any unit in a group is inside of a trigger zone. Returns true if any unit in the group is inside the zone.
Values:	Group Name Zone Name

Condition:	Part Of Group Out of Zone	Added with: 1.2.0
Description:	Checks to see if the any unit in a group is outside of a trigger zone. Returns true if any alive unit in a group is outside of the zone.
Values:	Group Name Zone Name

Unit

Condition:	Unit Alive	Added with: 1.2.0
Description:	Checks if a unit is alive. Returns true if the unit is alive.
Values:	Unit Name

Condition:	Unit Alive Less Than	Added with: 1.2.0
Description:	Checks if a unit is damaged beyond a certain point. Returns true if the unit is alive, but has less than the percentage of life remaining.
Values:	Unit Name Percentage (0 to 100)

Condition:	Unit Damaged	Added with: 1.2.0
Description:	Checks if a unit is damaged. Returns true if the unit is alive and damaged.
Values:	Unit Name

Condition:	Unit Dead	Added with: 1.2.0
Description:	Checks if a unit is dead. Returns true if the unit is dead.
Values:	Unit Name

Condition:	Unit Inside Zone	Added with: 1.2.0
Description:	Checks if a unit is inside a trigger zone. Returns true if the unit is inside of the trigger zone.
Values:	Unit Name Trigger Zone

Condition:	Unit Outside Zone	Added with: 1.2.0
Description:	Checks if a unit is outside of a trigger zone. Returns true if the unit is outside of the trigger zone.
Values:	Unit Name Trigger Zone

Condition:	Unit Inside Moving Zone	Added with: 1.2.0
Description:	Checks if a unit is inside a trigger zone that is "attached" to another units position. Returns true if the unit is inside of the trigger zone.
Values:	Unit Name Trigger Zone Unit Name trigger Zone is attached to.

Condition:	Unit Outside Moving Zone	Added with: 1.2.0
Description:	Checks if a unit is outside a trigger zone that is "attached" to another units position. Returns true if the unit is outside of the trigger zone.
Values:	Unit Name Trigger Zone Unit Name trigger Zone is attached to.

Condition:	Unit's Altitude Higher Than	Added with: 1.2.0
Description:	Checks if a unit is higher than a given altitude. Returns true if the unit is higher than the altitude, which is measured in meters and Above Sea Level.
Values:	Unit Name Altitude ASL in meters

Condition:	Unit's Altitude Lower Than	Added with: 1.2.0
Description:	Checks if a unit is lower than a given altitude. Returns true if the unit is lower than the altitude, which is measured in meters and Above Sea Level.
Values:	Unit Name Altitude ASL in meters

Condition:	Unit's Speed Higher Than	Added with: 1.2.0
Description:	Checks if a unit is speed is higher than a given value. Returns true if the unit is traveling faster than the given value, which is measured in meters per second.
Values:	Unit Name Speed in m/s

Condition:	Unit's Speed Lower Than	Added with: 1.2.0
Description:	Checks if a unit is speed is lower than a given value. Returns true if the unit is traveling slower than the given value, which is measured in meters per second.
Values:	Unit Name Speed in m/s

Condition:	Unit's Vertical Speed in Limits	Added with: 1.2.0
Description:	Checks if a unit is ascending or descending within a given range. Returns true if the units vertical speed is within the two limits. Speed is measured in m/s
Values:	Unit Name Minimum vertical speed (-300 to 300) Maximum vertical speed (-300 to 300)

Condition:	Unit's Bank in Limits	Added with: 1.2.0
Description:	Checks if a unit is banking within limits. Returns true if the units roll angle is within the two limits.
Values:	Unit Name Minimum roll (-180 to 179) Maximum roll (-179 to 180)

Condition:	Unit's Heading in Limits	Added with: 1.2.0
Description:	Checks if a unit is heading within limits. Returns true if the unit is pointing within the specified azimuth limits.
Values:	Unit Name Minimum Heading (0 to 360) Maximum Heading (0 to 360)

Condition:	Unit's Pitch in Limits	Added with: 1.2.0
Description:	Checks if a unit is pitching within limits. Returns true if the units pitch angle is within the two limits.
Values:	Unit Name Minimum pitch (-180 to 179) Maximum pitch (-179 to 180)

Flag

Condition:	Flag is True	Added with: 1.0
Description:	Checks the value of the given flag. If the flag has a value of 1 or more (True) then the condition is true.
Values:	Flag (number). Designates the flag to check

Condition:	Flag is False	Added with: 1.0
Description:	Checks the value of the given flag. If the flag has a value of 0 (False) then the condition is true.
Values:	Flag (number). Designates the flag to check

Condition:	Flag is More	Added with: 1.2.0
Description:	Checks the value of the given flag and compares it to a number value. If the flag has a value that is MORE than the given number, then the condition is true.
Values:	Flag (number). Designates the flag to check Value (number). Value to compare the flag against

Condition:	Flag is Less	Added with: 1.2.0
Description:	Checks the value of the given flag and compares it to a number value. If the flag has a value that is LESS than the given number, then the condition is true.
Values:	Flag (number). Designates the flag to check Value (number). Value to compare the flag against

Condition:	Flag Equals	Added with: 1.2.0
Description:	Checks the value of the given flag and compares it to a number value. If the flag and the number have the same value the condition is true.
Values:	Flag (number). Designates the flag to check Value (number). Value to compare the flag against

Condition:	Flag Equals Flag	Added with: 1.2.0
Description:	Checks the value of the two given flags. If both flags have the same value the condition is true.
Values:	Flag (number). Designates the flag to check Flag (number). Designates the flag to check

Condition:	Flag is Less than Flag	Added with: 1.2.0
Description:	Checks the values of the two given flags and compares them. If the second flag has a lower value than the first flag, the condition is true.
Values:	Flag (number). First Flag Flag (number). Second Flag

Cockpit

Cockpit triggers only work in single player and are intended for training missions.

Condition:	X: Cockpit Argument In Range	Added with: 1.2.0
Description:	Checks if the cockpits argument id is within a given range. Returns true when the argument is within the specified range.
Values:	Argument Id (number) Minimum Range (-1.0 to 1.0) Maximum Range (-1.0 to 1.0)

Condition:	X: Cockpit Highlight is Visible	Added with: 1.2.0
Description:	Checks if the highlighted argument is within the players view. Returns true if the player is actively looking at the position of the instrument the argument is associated with.
Values:	Argument Id (number)