The DED and ICP

From DCS World Wiki - Hoggitworld.com
Revision as of 22:28, 17 May 2018 by Jeremy Smitherman (talk | contribs) (Created page with "=== Introduction === ---- The DED (Data Entry Display) allows the pilot to view, input and edit information in the flight computer. The ICP (Integrated Control Panel) is the...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Introduction


The DED (Data Entry Display) allows the pilot to view, input and edit information in the flight computer. The ICP (Integrated Control Panel) is the interface through which the pilot accesses, inputs and edits data into the flight computer.

The ICP

ICP-highlight.jpg

As you can see I have highlighted certain areas of the ICP:

Red

  • Override Functions.
    • A-A takes you to Air-to-Air Mode. Pushing it again returns you to NAV Mode.
    • A-G takes you to Air-to-Ground Mode. Pushing it again returns you to NAV Mode.
    • See DED Pages section for other Override Functions.

Green

  • Aside from using the numbers to input values into the DED, these keys also have Primary Functions that take you to certain DED pages. From within the Override Functions these keys also have Secondary and Tertiary Functions that take you into further DED pages.

Purple

  • DRIFT C/O
Fixes HUD pitch ladder and FPM to the center of the HUD (helpful in high crosswinds at altitude).
  • NORM
Allows HUD pitch ladder and FPM to drift with wind.
  • WARN RESET
Extinguishes HUD WARN messages.

Pink

  • DCS (Data Command Switch)
    • SEQ (right)
      • Cycles through DED pages
    • RTN (left)
      • Returns to the main DED page (CNI Page)
    • Up/Down
      • Moves the Scratchpad (see DED section on the scratchpad)

Yellow

  • Rocker Switch
Cycles STPTs

Other Functions


SYM Wheel
Turns on/adjusts HUD brightness.
BRT Wheel
Not implemented
DEPR RET Wheel
Turns on/adjusts brightness of Depressible Reticle (backup bombing sight)
CONT Wheel
Not implemented
FLIR Section
Not implemented

Scratchpad

BINGO.jpg

The concept of the Scratchpad is pretty simple. Within the DED it is denoted by two asterisks surrounding a value or blank spot. As you can see in the image to the right the Scratchpad is currently highlighting the SET value of 4500LBS. To input a number simply hit the number keys on the ICP followed by the ENTR key. Pressing the RCL key will erase previously inputted data if it has not already been entered via the ENTR key. Pressing the DCS up or down will move the Scratchpad around the DED page.

DED Pages


CNI Page (Main DED Page)

Override Functions

Primary Functions

Secondary Functions (LIST Page)

Tertiary Functions (LIST - MISC Page)